December 12, 2025
Description
This is a model of the Kizer Pac-Bar keychain multitool scales I created so I can print myself one in glow in the dark filament.
The angled front is shorter by 0.5mm for the overhang to print nicely, reason below. The default thickness is 1.5mm, I like 1.75mm but 2mm works just as well, the screws are long enough.
PRINT UPSIDE DOWN for a textured finish. I recommend supports and 0.1-0.12mm layers but see how it goes first.
Source available on request, for now.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
SPP
