November 30, 2025
Description
I read of many people that had artifacts caused by the Elegoo mini heater fans so I made a deflector that should prevent the resin from being disturbed.
The piece just fits around the heater mounted with the original bracket and it can be used both for the intake and the exhaust.
It had been made to be used in a Saturn 3 Ultra but it should fit other printers too if you have enough clearance below the heater.
I used ABS but you can use what you want.
If the 1st print it's too loose for the intake, use it for the exhaust and adjust the shrinkage for the next print :)
No supports needed, printed as it is.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
ricrom
