Sun Rey

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm 

The Model is 133.33x200mm in size 

You may print at higher layer heights below the Base Thickness of 0.48mm 

The Max allowed Thickness is 2.24mm and the Actual Thickness is 2mm 

#000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #977133 PLA+ Sunlu Coffee Transmission Distance: 3 #f99963 PLA BambuLab Matte Mandarin Orange Transmission Distance: 3 #e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8 #e4bdd0 PLA BambuLab Matte Sakura Pink Transmission Distance: 3 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 

This print uses 8 unique filaments 

Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #10 (0.88mm) swap to Coffee At layer #12 (1.04mm) swap to Mandarin Orange At layer #14 (1.2mm) swap to Beige At layer #17 (1.44mm) swap to Sakura Pink At layer #20 (1.68mm) swap to Jade White At layer #23 (1.92mm) swap to Yellow for the rest.