Magnetic Saw Guide (12mm round magnets)

There are many of these out there, but none for 12mm magnets?  As always, let me know if you have improvements (or want other magnet sizes)!

Parts

• handsaw
• 12mm round magnets

Printing

• PETG
• 4-5 perimeters
• 15% infill
• 0.2mm layers
• minimal support recommended
• depending on your usage, you may want to print the mirror image

Usage

1. Print
2. Press fit the magnets in - this should be snug, a 5mm dowel may help
3. Clamp the guide to a piece of wood you want to cut
4. The magnets hold the saw in place, ensuring a clean cut