E3Dv6 Bowden X-carriage mount por Geeetech Prusa i3

This is a remix to adapt the (excellent) E3Dv6 mount to a Geeetech carriage. I have moved screws positions a little bit in order to fit Geeetech X carriage holes, and I've lowered main support a little bit, so extruder nozzle ends up below X carriage plate. I've also made nut holes a little bit smaller, so they fit M3 nuts.

UPDATE:

First version didn't work that well on my printer, there wasn't space enough in X carriage holes to fix it properly, I have revamped it (v2) to make it work. Now, instead of just using empty holes in X carriage, it uses existing nuts (which might need to be replaced with others slightly longer), and the result is much cleaner and more properly placed. I've also added some spacing for existing nuts which were in place. Still a work in progress though, expect some more iterations until everything fits fine.

ANOTHER UPDATE:

Created a v3, modified it a little bit so the nozzle homes at Z=0. Previous versions were lower, and required setting home at Z=-10 or so, and a firmware update was required, which may not be convenient. It's pretty much finished right now, I may move fan duct holes a little bit since I have the impression they won't fit, but since fan duct stays pretty well just by pressure it's a minor detail.

v4 has some minor, subtle improvements.

Print Settings

Printer:

Geeetech Prusa i3 Aluminum

Rafts:

Supports:

No

Resolution:

Infill:

25%

Category: 3D Printer Parts