Happy 3AM Santa by the Tree

A cute, jolly Santa Claus standing beside a Christmas tree, holding a warm mug as if he just woke up at 3AM to check on the holiday magic. Designed with smooth, rounded surfaces to print perfectly on an FDM printer like your Creality K1 Max.
This model is optimized for single-color printing, but also works beautifully in multi-color CFS mode.

🖨 Recommended Print Settings (K1 Max Optimized)

 Creality K1 Max

Material: PLA

Color: Any solid festive color (Red, White, Green, Gold)

Quality Settings:

• Layer Height: 0.20mm (or 0.16mm for extra clean detail)

• Wall Thickness: 3–4 walls

• Infill: 12–15% gyroid

• Top/Bottom Layers: 4–5

• Speed:

  • Outer Wall: 80mm/s

  • Inner Wall: 150mm/s

  • Infill: 150mm/s

  • Travel: 300mm/s (K1 Max handles it easily)

Supports:

• Tree & Santa beard area: Minimal supports

• Support Style: Tree supports (Orca) or Standard (Creality Slicer)

• Support Interface: ON for super clean undersides

• Support Density: 10%

Build Plate Adhesion:

• Brim: Recommended (4–6mm)

• OR

• Glue stick if using textured plate

Orientation:

• Print upright exactly as shown — the model is stable and optimized for that.

🎄 Size / Scaling:

Generated size fits well on K1 Max, but you can scale up to 200% safely.
No joints or interlocking parts to worry about — resizing won’t affect anything.