Tenor Recorder Stand / 3-Part Holder with Accessory Storage

This holder ensures the three parts of your instrument are safely separated and organized. It is also designed to hold common cleaning accessories.

Key Features & Design:

• 3-Part Organization: Dedicated slots for each part of the recorder:

  • Top Shelf: For the Middle Joint

  • Middle Shelf: For the Head Joint

  • Bottom Shelf: For the Foot Joint

• Integrated Storage: Includes dedicated holders for a Grease Pot and the Cleaning Rod.

• Dimensions: Width 108 mm, Length 155 mm, Height 85 mm.

• Compatibility: Tested to fit the Mollenhauer 5406 and Aulos 211A Tenor Recorders.

Assembly Note:

The inner edges where the recorder rests are designed to be padded. For optimal protection, apply felt padding (e.g., self-adhesive felt strips) to these contact surfaces.

Print Settings & Instructions:

• Material: PLA or PETG. (PLA was used for testing, but material choice is flexible.)

• Layer Height: 0.2 mm

• Infill: 10–20%

• Perimeters (Walls): 3

• Top/Bottom Layers: 4

• Supports: None required.

• Printing Orientation: Print the holder standing upright on its largest base for maximum strength and best surface finish.