Customizable hose adapter – Oval section

Here’s an example of what you can create with the new template on the iteration3d platform:

https://www.iteration3d.fr/en/templates/template-view.php?templateid=26

You have 11 parameters available to generate the oval-to-oval duct adapter of your choice:

1. Side A internal width (10 to 300 mm – up to 1 decimal place)

2. Side A internal height (10 to 300 mm – up to 1 decimal place)

3. Sleeve length on side A (5 to 100 mm – up to 1 decimal place)

4. Side B internal width (10 to 300 mm – up to 1 decimal place)

5. Side B internal height (10 to 300 mm – up to 1 decimal place)

6. Sleeve length on side B (5 to 100 mm – up to 1 decimal place)

7. Thickness (1 to 8 mm – integer)

8. Transition length (20 to 300 mm – up to 1 decimal place)

9. Y offset (0 to 300 mm – up to 1 decimal place)

10. Z offset (0 to 300 mm – up to 1 decimal place)

11. End chamfers (optional)

Give it a try!