December 5, 2025
Description
Kyosho 4x4 Mini-Z MX-01 Battery Tray
Supports:
Yes
Infill:
100%
At 75.0 mm/s print speed it takes roughly 1hr 5mins for the print.
I do recommend using a 1/16 drill bit to hone out the holes for the screws.
This item is strictly for personnel use and I don't give rights for the use of selling.
Images shown have Dunlap on the servo mount, but this file will have the servo mount blank.
License:
Creative Commons — Attribution — Noncommercial
10
ToDamLazy
