Dog/Cat Feeder Stand

I printed all the parts in PLA-CF except for the feet which I printed in TPU for skid resistance. You will need a pair of M5 x 37mm long minimum screws and M5 locking nut with nylon insert. In the highest position (-06) the height of the bowl base to the floor is roughly 13cm. In the lowest position (-01) the height of the bowl base to the floor is roughly 3cm. Bowl diameter should not exceed 15cm. In the -01 position the bowl can only be level and that is with no strut For all other positions the struts provide level position of the bowl when the same numbered strut is utilized. Skip the strut for a downward tilt of the bowl of approximately 10 degrees - a function of the weight of the bowl plus feed or water. By selecting the next shorter strut the bowl can be supported in the tilted presentation.  Cheers....