December 8, 2025
Description
Designed to fasten ceiling tiles directly to the joists in order to gain an extra 5 inches of height in my basement. The measurements are: Each support is 25mm (1 inch) long from center and 5mm (7/32 inch) wide from center) Depth is 13.5mm (~ 1/2 inch) total. Designed to use a #6x flat set screw.
Can be used to attach/fasten other flat plane items to a wall or ceiling. It is surprisingly strong, even when using PLA. Impact driver will drive through it before cracking.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
DirtyJerzRoDo
