Prusa Mini+ Upgrade (Edition 2) Revo Micro

MODEL DETAILS

Please refer to this upgrade guide.

Prusa Mini+ upgrade featuring the E3D RapidChange Revo Micro
Update: Check out our new Revo Prusa Mini Edition kit for a simplified upgrade

- No firmware changes are required to complete the upgrade.
- Carriage is 25 grams lighter than stock 
- Passes the Prusa Mini's self-test
- Uses the same fixings as the original HotEnd 
(you won't need any extra screws to complete the upgrade)
- Faster Heatup and Cooldown times
- 30-second nozzle changes 

There are two mounting versions available. 
The default option threads directly into the printed part, and there's also a version that uses square M3 Nuts for a stronger connection.
 
How to use the provided support enforcer:
Right-click on the part in Prusaslicer 
→ Go to 'Add support enforcer' 
→ Click on ‘Load’ 
→ Select the ‘Support enforcers’ part

Gcode is provided for printing on a Prusa Mini+ in both PETG and ASA.

RECOMMENDED PRINT SETTINGS

0.4mm Nozzle or smaller, 0.2mm Layer height or lower. More detail is provided in the upgrade guide. You can use the provided support enforcer STL to reduce the amount of generated support material.

Check out E3D!