December 10, 2025
Description
Made this for my buddy and figure I would post it so that you can use it as well!
The clamp fits nicely on his Elantra's rear view mirror stem, but if you need to you can always modify the STEP files to fit your car's if it is different!
You will need 2x 14mm M3 screws/4mm brass inserts, and 3x 14mm M2.5 screws/4-6mm brass inserts.
Print with something other than PLA if you want it to stand up to car temps!
Specific dash cam used: https://www.amazon.com/VIOFO-STARVIS-Control-Parking-Supercapacitor/dp/B0C5MVB7NX?crid=1I138VBSH7PY8&dib=eyJ2IjoiMSJ9.gYfZw9JImHmo4H1GGP__xSoK6drn7u9yBXyosShWCeF-Ql1sSvOEp4rySSPfbHAtcHs9O3-T28TJg34NAwxSYpH5Nr7tsdIUeuz1lCSYnmWxcQrw2INd97xERP14v93iwQqRXbRxisQZEFLx7g0cdq3smwzfwvh-oCxSwbuP8UljNIVrgp2J4BW11rN8_HfUN17qdwIgQtz6y47qwIffv3tWlckECGLicQA3rmKw58Q.ROMJcf3KfQlgoHVuy4WxNXaAObYz3K0ReDoLjOORqGA&dib_tag=se&keywords=viofo+dash+cam+a119+mini+2&qid=1765338047&sprefix=viofo+dash+cam+a119+mini+2%2Caps%2C119&sr=8-3
License:
Creative Commons — Attribution — Noncommercial
OrganoPrint Labs
