Traxxas 3.00 x 1.925 Rims for Rustler 2x4 and 4x4 Trucks

EDIT 2

Here are the 0.85" wide rims and tire for the front of your 2WD if you want that dune buggy look.

EDIT 1

I added rim design 011 through 014. I also slightly modified rim 008 by adding an 0.030" fillet on the top edges.

ORIGINAL

My son wanted some drift wheels for his Traxxas Rustler 4x4 so I designed some sleeves that fit the 3.00 x 1.925 rims that fit his truck. Since the two rims I have designed were primaily for offroad, I made them quite beefy. Since there are very low (comapared to offroad) forces on these drift sleeves, I designed some different rims that I thought looked cool. I am currently printing rim 007 right now, and I'll update you guys and let you know how well they hold up soon.

So, here are the original rims I designed that work fine for offroad.

The drift sleeves are here. The paddle sleeves are here.

I print them in PLA with 3 perimeters, 6 top and bottom layers and 25% gyroid infill. I know it's probably overkill, but I don't care.

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Rafts:

No

Supports: 

Yes

Resolution:

0.2mm

Infill: 

25% Gyroid

Filament: Hatchbox / AMZ3D PLA Any

Notes:

These should be printed with the outward facing side of the rim up, and supports enabled.

Category: R/C Vehicles