127mm Sandpaper Tray System

All the versions I found of this had some of the features that I wanted, but none of them had all the features.

When wall-mounted, the trays swing 120degrees wall to wall allowing full access to the papers inside.  

There is a finger hole in the bottom centre to allow for the papers to be pushed up.

The top bracket is a thru-hole allowing for adding and removing trays as required.

A label bracket was incorporated so that labels can be changed and are not printed into, or glued onto the trays so that they can be re-assigned as the content changes.

This one is designed to work with 8mm linear rod as the only extra piece.  The screw holes in the mounting plates are sized for #8 wood screws.

All STL's can be printed flat without any supports.

Labels are designed to allow for either multi-color printing, or for the embossed text to be coloured with a marker.