Shoehorn Wall Holder – Simple Design in OpenSCAD

I made this small wall holder to keep my shoehorn in one place and easy to reach in the hallway. It’s sturdy, practical, and does the job well. Fits shoehorns up to 28 mm wide at the top.

Size:

• Width: 36 mm

• Depth: 33 mm

• Screw holes: 3 mm

• Center screw hole: 4 mm

You can mount it with one screw in the middle or use both side holes for extra stability.

You’ll need a bit of support when printing.

Happy Printing!