March 16, 2022
Description
Print, mount and put something on it. Maybe a flower or a picture…Rack diameter ~150mm.
1x M3 nut, 1x M3x12 screw and 2x flat headed screws, about 3.5-4x40mm or longer for connecting the rack to a wall needed.
0.4 nozzle, 0.2 layer height, 10% infill, no supports. 6 or more bottom layers and 3 or more perimeters recommended. Printed in PETG.
Should hold more than 5kg, but i did not test it. Be careful not over tightening the screws!
Update 18.03.22
-added a bit more clearance to Wallmount
License:
Creative Commons — Attribution — Noncommercial
Stefan
