Any Shelf/Cabinet Spool Storage

I have created these rod holders, as I needed more space in my cabinet and shelfs for more filament! I mean who dosnt? right ;)

All you need besides printing these files is a Ø22mm rod that you cut to the lenght you need.

There are 2 versions one to put on a shelf, and one to put inside a cabinet, only difference is the orientation of the mounting holes, så you can mix and match to fit your setup if needed, and still keep the overall good appearance.

-There is also a mid piece if you go really long rods and need some support halfway or something like that, I used one in the bottom of my cabinet, this is only for show, as the rods are only 75cm long and dosnt require extra support in this case :)

I was able to fit 4 rows of filament in a standard IKEA BILLY cabinet from the mid shelf (non moveable shelf)

The goal was to make an easy minimalistic system that would hold up, and I think I got what I wanted, and I hope this can help you to.

Happy printing, and let me see those makes :)

any support is greatly appreciated <3

added side-mounted STL if you wanna have the rods just laying in them :)