Part to make your TBS Mojito NOT FLY OUT OF THE SKY LIKE A BRICK

The TBS mojito FPV wing has some issues... Especially in the connection of the wings. These parts are designed to:

• Solve issue of wrong connector engagement (spacer)

• Solve issue of wing detaching with turbolence or vibrations

The wing latches MUST contain a HEX nut that should be inserted mid-print with a pause. Please print them standing as they will be used in the wings. You will see the hole for the nut in your slicer :)

When gluing the TAB in the fuselage please use an exacto knife to start the hole and then dry test fit it without glue. Draw a line on how deep it should be inserted and only after glue it in.