December 18, 2025
Description
I wanted a place to put my 3 inch painters tape that wasn't in the way, so I made this holder that uses the 75mm long Command Strip. Since not everyone uses 3 inch tape, I also made a 1 and 2 inch as well. The large command strip may be overkill for the smaller tapes, but you could use the 3 inch holder to hold multiple 1 inch tapes. :)
Printer Brand:
Monoprice
Printer:
Maker Select
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.175
Infill:
20%
Notes:
Print with the flat side down on the print bed.
License:
Creative Commons — Attribution — Share Alike
7
barrooze
