Remix of the "Design Moon Lamp" optimized for Prusa Core One

Remix of the Design Moon Lamp by Frank Deschner to be able to print it better on the Prusa Core One with additional settings:

• Organic supports activated in the top moon parts to avoid holes in the top surface

• Fuzzy skin on the holder parts

• Preset infill, wall and other settings in the .3MF files 

• Avoid crossing parameters to enhance print quality 

• Reduced print time (about 26 hours compared to to his print time infos)

Printing instructions:

• 0.2 speed profile

• White PLA for the moon part

• Any PLA color you like for the holder parts

• Moon part:

  • Brim set active

  • Brim width: 5mm

  • Painted supports on the inside top part

  • Organic supports for support enforcers set active

  • Infill: 100%

  • Fill pattern: Rectilinear

  • Avoid crossing parameters set active

  • Detect bridging parameters set active

  • Fill gaps set active

  • Perimeter generator: Arachne

• Holder parts:

  • Infill: 30%

  • Perimeters: 8

  • Fuzzy skin painted on the outside walls

Notes:

• All settings are set in the provided .3MF files already =)

• Newer LED light bulbs like usual E27 ones with Ø60mm theses days don't fit the original design, which tricked me too on my first try. I ended up using this E27 230V LED bulb with Ø45mm with one of these E27 power cords (DE 230V variant).

Here are some detail pictures:

Happy printing =)