December 20, 2025
Description
A 3D printable Monstercat logo created from an SVG file. The model is perfect as a wall decoration, decorative interior element, or a stylish accent for your workspace.
The model was printed successfully on an FDM 3D printer using PLA filament.
Print settings:
Material: PLA
Nozzle: 0.4 mm
Layer height: 0.2 mm
Supports: Not required
Important note:
The model is intentionally flipped upside down. This was done so that the side touching the print bed becomes the front face of the model. Since my build plate has a nice surface texture, it creates a clean and visually appealing finish on the visible side - especially suitable for wall mounting.
License:
Creative Commons — Public Domain
Mistyowl
