Kulp K16-A-B (Beagle Bone) Controller PSU Mount

Simple to print, print face down.

This PSU Mount is designed to fit the standard hole dimensions for PSU (verified on Alitove and Meanwell).

The design has a in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only uses top screw holes on the PSU to allow the bottom to be used for PSU mounting.

Mounting Hardware:

2x - M4 - 8mm bolts (secure mount to PSU)

4x - M3 - 12mm bolts/nuts (secure controller to mount)

Print Settings

Notes:

Print Settings

Nozzle: .4mm (.6mm or larger will work too)

Layer Height: .32mm

Perimeters: 3

Solid Layers: 4 top/bottom

Infill: 10%

Speed: Standard, but slower is better for the support brackets

Category: Electronics