Ssx23 / MK23 Carbine Kit v3 (fixed)

Longest piece is 270mm.
Please print for others but do not make money from that design.
need M4 screws and nuts for assemble, also 1 m3 on top.

Pistol will fit very snug, therefore, please print 100,3%

Supports need on body screw holes and for picatinny rail on lower module.
I printed from ASA, but should wok fine with PLA etc.
Please print with no less than 3 perimeter shell, don't want it break like other
printed kits, what ppl selling.

Infill: aprox 35%

Probably need some fine sanding on pixatinny, to fit grip etc.
those measur are approx. because i cutted them as they were too long:
Buffertube m4x65
butt adapter:
m4x58 m4x54
Center m5x50

Front m4x45 (2 screws)
M3x60
And some m3x12 to secure rail part

I grinded them afterward so you should do same.

Please post your makes and enjoy the file!

https://www.thingiverse.com/thing:2851954/comments =original link, file is partially corrupted on there