December 22, 2025
Description
Commonly sold with various Coca-Cola branding.
Fits models KWC4BT, KWC4C, KWC4B (Coca-Cola), DC04 (Diet Coke), FA04 (Fanta), SP04 (Sprite), and CZ04 (Coke Zero).
Model: CCShelf-6C
Dimensions are a bit above 5" L x W (the model is 137.37mm x 134.50mm, not counting the back tabs).
I had trouble finding a replacement shelf for our mini fridge. When I finally acquired a replacement shelf, I decided to take its measurements and try to re-create it in FreeCAD in order to share the model with
others.
The design doesn't match the original exactly, but it's close enough.
If you've lost or broken the shelf in your mini-fridge, give this one a try.
Due to the nature of PLA, it's probably better to print this with PETG. (PLA may sag/deform over time with weight on it.)
The 3MF print profile has presets that seemed to work fine for me, using a 0.4mm nozzle:
0.20mm layer height, 4 wall loops, 15% infill.
Mini Fridge Replacement Shelf Changelog:
2025-12-21, 1.0
initial release
tested, functional design
Created from scratch using FreeCAD.
License:
Creative Commons — Attribution — Noncommercial
BitingChaos
