Intellivision Cartridge-Style USB Shell

An Intellivision cartridge-styled shell for USB flash drives (Sandisk Ultra Fit).

The location of USB ports on the Intellivision Sprint console, under the overhangs, makes accessing/removing very small USB flash drives a little awkward.  I made this to make it easier to hold/remove such drives.

It is styled, rather than scaled, like an Intellivision cartridge to make it a bit more interesting.

Printing:

Works fine in PLA.  Print w/ 3 walls, 15% infill.  Looks better printed vertically, and at 0.1mm layer-height, unless you have a smooth build-plate, but that will require tree-supports.

.STL is oriented to print flat to avoid the need for supports.

Printer calibration/tolerances will determine if it snaps together snugly around the Ultra Fit drive, or needs adhesive.