December 23, 2025
Description
System for securing a 2S Shorty Lipo in a Schumacher Mi5evo RC car.
Needs 4x M3 heat threaded inserts, one each for the forward and rear retainers and one each for the forward and rear posts. You need to use fairly short M3 bolts to secure the posts.
I've made this for a Lipo which is 24.5mm in height.
Printed in 1.75mm PLA at 10% infill but perhaps PETG would be stronger for this use case.
License:
Creative Commons — Attribution — Noncommercial
9
joek1973
