PVC Pipe Sword Cross Guard

Disclaimer: Exercise caution and use only in outdoor or open spaces. Designer is not responsible for personal injury, property damage, or hurt feelings.

You will need the following extra hardware:

• 1x 0.75in ID PVC pipe (1-1/16in or 27mm OD)

• 4x socket screws: 10-32 x 1.5in or M5 x 40mm

• 4x hex nuts: 10-32 or M5

• insulating foam jacket

Print the model version corresponding to the screws you have. PETG is recommended, since PLA sags over time and has poor impact resistance. If the screws get stuck in the holes, pre-drill them out with a 5mm bit.