Filament Cleaner with Magnets, no glueing

If you have dusty filament it can show up in the print. This removes it.

Use 8 pcs of 4x2mm magnets, just push them in. No glue needed.

Doublecheck the magnets have the correct orientation, especially when you do the second half.

This is made from scratch but used the idea of the Magnetic Filament Cleaner by Antipode.

Just cut a sponge in shape and put it in (height should be a bit higher so the filament is gets squished between).

STEPS included.

Print two times. No supports needed.