Aviation 4-Cyl & 6-Cyl Spark Plug Holder

This 4-Cylinder & 6-Cylinder Aviation Spark Plug Holder was designed to fit the Tempest and Champion plugs that I had to test with.  The handle is printed separately from the holder which also allows you to print them using different colors.  I used PETG for both the holder and the handle so it would better handle any hot spark plugs you may insert into the holder.  When printing the holder I have a color change on the last 2 layers for the lettering and outlines, these are in the sliced files as well.

Print Info

Filament: Inland PETG+ Silver from Micro Center, SKU 151605 for the holder and Prusament Prusa Orange PETG for the lettering and handle

Printer: Prusa CORE One with HF 0.4mm nozzle

Layer Height: 0.2 mm, Balanced Profile

Top Layers: 5, Bottom Layers:4

Perimeters - Holder: 2

Perimeters - Handle: 2, but then for heights 70 - 87.2 the sliced files have the perimeters set to 5 for the upper plug-in connector

Infill:  Grid, 10% for the Holder and 15% for the Handle

Supports: Support on build plate only. This is just a small amount inside the base where there is a 5mm overhang to match the 32mm inside diameter of the hose.

Adhesion: None