Modular Opera Chair, easy to print, no glue

A modular Opera Chair, two-color printing possible, no glue required, simply slot it together.

The size is about 1:10 of a real life chair.

Printing instructions:

• 0.4 nozzle

• 0.2mm Structural

• Supports

  • Legs: use brim

  • Seat: Organic Support on build plate only

  • Back: Organic Support on build plate only 

• 15% infill

• for two color prints a MMU or other Multicolorunit is needed, use preconfigured .3mf files

Assembly:

• push the back down into the seat part until it sits firm

• push the chair legs into the holes under the seat

• turn each chair leg so that the leg curve points towards the outer corner of the chair