Voron 2.4 Magnetic Poop Bucket

A compact and removable side‑mounted poop bucket system designed for the Voron 2.4.

Assembly Guide

1. Insert magnets into arm and bucket pockets.

2. Push in covers flush to lock and hide magnets.

• Note: use the two taller covers for the bucket.

3. Place 1 mm foam underneath both arm and bucket.

4. Mount the arm to the bed extrusion using the M3x8 screw and T‑nut.

5. Attach the bucket — magnets hold it securely, and it can be removed easily for emptying.

Print Instructions

• Material: High‑temperature filament only (ABS or ASA recommended)

• Layer height: 0.2 mm

• Infill: 20–40%

• Supports: Not required

• Orientation: All parts printed flat for strength and dimensional accuracy

• Notes: Ensure magnet pockets are clean for proper press‑fit

Bill of Materials (BOM)

• 1× Arm (printed)

• 1× Bucket (printed)

• 4× Magnet covers (printed) — 2 taller for bucket, 2 shorter for arm

• 4× Magnets Ø6 mm × 3 mm

• 1× M3x8 screw

• 1× M3 T‑nut

• 1× Foam pad, 1 mm thick — cut to size, for arm and bucket

⚠ Warning

This design may not be compatible with every printer setup. Improper installation or misuse could result in crashes, collisions, or equipment damage. The designer assumes no responsibility for any harm to machines, property, or personal injury arising from the use of this design.