December 27, 2025
Description
I wanted some wood foregrips for my LCT LCK74 so i designed my own in fusion I they will fit most airsoft AK's like Cyma etc as I think they are all the same dimensions, but this is untested and would love feedback and to see your makes You don't have to print in wood though. I might print another set in white or gold :) below is the process i used to get the wood to look authentic
To get the dark orange birch wood effect i first stained the print with a dark fence paint after it had dried i then rough sanded it back to remove it leaving it in between the layers. I then painted the surface with orange dye and dipped my brush into to a small amount of black paint to finish the effect. After it had dried i vanished them I used a clear varnish
I printed them using a wood filament and a .6 nozzle supports on base only 50% infill
Printer Brand:
Creality
Printer:
CR-10
Rafts:
Doesn't Matter
Supports:
Yes
Notes:
I printed them using a wood filament and a .6 nozzle
supports on base only
50% infill
Get the birch wood effect
To get the dark orange birch wood effect i first stained the print with a dark fence paint after it had dried i then rough sanded it back to remove it leaving it in between the layers.
I then painted the surface with orange dye and dipped my brush into to a small amount of black paint to finish the effect.
After it had dried i vanished them I used a clear varnish
License:
Creative Commons — Attribution — Noncommercial — Share Alike
10
CheerfulScumbag
