Skateboard Wheel Wall Display

Another highly specific print I put together because I couldn't find something exactly like I wanted. I got a new skateboard but needed to replace the wheels with softer ones, but they were cute so i wanted a way to display them.

The wheels displayed are 52mm wheels, but this should fit wheels up to about 60mm. The pegs will hold any wheels that have 25mm between the back face of the wheel and front of the inner lip of the bearing seat. The cap on the peg is 14mm in diameter, and it's there to prevent the wheel from sliding off the peg.

I printed this in PLA, with organic supports everywhere to support the caps on the pegs. I attached it to the wall using 3M command strips, and it seems pretty stable.