Replacement Cap for Bath and Body Work Wall Flower Refill

I made one that was close to the original size, but it needs supports and wasn't very strong with a 3d print.  With this one, you don't need any supports and it's much stronger.

I didn't have to use a Raft when I printed mine, but you may have to if you have trouble. The contact area is very small that touches the build plate, so something to keep in mind.

It screws on really nicely with my printer, but you may have to scale up or down depending on how your printer...prints :)   Remember, these things are reverse threaded, lol

I highly doubt this is "air" or "water" tight, so keep that in mind and don't store them upside down, some of the oil could seep through the layer lines on this cap.

As just a general replacement to stop things from touching the wick though, this works well :)