June 3, 2026
Description
A slightly stronger version of the original K1C Unibody Riser Hinge, using bolt and nut. Feel free to edit on my Tinkercad.
TIP : You can use rubber washer with lock nut to make friction hold hinges.
These are my AliExpress affiliate links. They don't cost more, but I do make a small commission - That will help offset the costs of my future projects. 👍
(4X) M3*8 Screws
(2X) M5*25 Screws
(2X) M5 Nuts | M5 Lock Nuts
(2X) M5 Washers | M5 Rubber Washer
Mostly follows the original.
0.2mm layer height, 25% gyroid infill.
Rotate beam 45 degrees and lay flat.
Both hinges can be laid and printed flat.
A little bit of supports for the screw holes will be nice.
License:
Creative Commons — Attribution — Noncommercial
7
Red Dot Geek
