Taste of Beauty (Binomi) / MARETU - Vocaloid Disc Prints

Song: Taste of Beauty (Binomi) / MARETU - https://www.youtube.com/watch?v=fGizrX4JjPg

This is modelled after MARETU's song Taste of Beauty (or Binomi) which is used to represent the song for my music box project. I made it using Fusion 360 using image reference to extrude the design on a circular disc. I also attach RFID sticker at the back so I can play the music to a 3 watt speaker when I scan it with my RFID reader. It's also a very fun painting project.

There are two STL files. One is just the design and other has two 8x2.5mm magnet holes with 0.4mm tolerance.

I used standard PLA with tree supports at 0.3mm resolution with 3 wall lines no brim. I find supports for the magnet hole not necessary but it depends on the 3D printer bridging capability. Infill can be whatever as long as it structurally holds. Be extra careful when removing the supports especially around the fork tips as it's quite thin and can bends quite easily.

Everything is for non-commercial use :)

Category: Art