March 21, 2022
Description
This is a mount to hold 2x spare module heads and spare accessories that slots onto the side of the enclosure for an A250 or A350 Snapmaker.
The one photographed features an extra pocket on the side for other accessories but I've uploaded another design without that.
The enclosure comes with a pack of spare mounts that slot into the frame and this uses 2x of them along with 4x M3 nuts and 4x M3 bolts.
Rafts:
No
Supports:
Yes
Resolution:
0.25
Infill:
20
Filament:
Filamentive PLA
Notes:
I printed this at 0.25 layer height to reduce print time and I had a variable infill, so most of it had 20% infill, and the infill increased to 50% just before the top of the main pockets layer (to make sure the angle on which it hangs is nice and strong.
The support is for the curve back on the part that screws into the hooks, it may be that this will work without support material but I'd find out so long into a long print that I decided to just throw support in there and it came out great.License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
7
ByteSlinger
