Cap for Aqua Pure Traveller filter bottle

This is a protective cap for the Aqua Pure water bottle to protect the drinking end from getting dirty when travelling, and a tether to make sure you don't lose it.

I've travelled through jungles and rain forests with this cap and it works great!

If you like this model, you can tip me via 'Buy Me a Coffee' here: https://www.buymeacoffee.com/JoshForwood

Print Settings

Notes:

Print the cap in a solid material, I recommend PLA, at a minimum of 0.2 and 20% infill. No supports are required for this print.

For the tether, print in a flexible filament such as RigidInk's flexible PLA at 50% infill.

Category: Other