CR-10 Anti-Vibration Feet

Whilst preparing for the sequel to my popular YouTube video on silencing the CR-10 (https://youtu.be/Vlta31wswAE), I designed these feet for the CR-10 range to dampen noise from vibrations against the table surface.

They make a difference and keep the printer really nice and stable.

I hope you enjoy printing and using my design. To help me keep designing and uploading more things, as well as continue to run my YouTube channel (www.youtube.com/c/3drevolution), please consider making a small donation to me via PayPal: www.paypal.me/JoshForwood

Thank you!

Print Settings

Rafts:

No

Supports:

Resolution:

At least 0.2

Infill:

Notes:

This is designed to be printed in a flexible filament such as flexible PLA or ninjaflex.

For the infill, if you have S3D, set it to 5% from the bottom up until 5 layers before the base of the "cup" begins (where the printers built in foot will sit), at which point set it to 10%.

If you can't adjust the infill at different layer heights, I'd recommend trying 10% all the way through and seeing how you find it.

Category: 3D Printer Accessories