CTEK Charger Mount for Slatwall

I use this for mounting my CTEK MUS 4.3 Charger bracket to Slatwall along with M5 bolts.  (it just threads straight into the part

I spent a lot of time trying to tweak the dimensions so that the parts would latch onto the Slatwall but not marr PVC Slatwall, but this is about the best I could come up with. I found it that different areas of wall could be looser/tighter and also different filaments played a role as well. In many cases you will need to file down the little latching nub a bit. Don't force it onto your wall if you feel too much resistance. You can and will damage PVC Slatwall this way.

I have only tested with storeWall as that is the only system I personally have, but in theory this should work for most 3" Slatwall if the dimensions are close enough. I would appreciate any feedback if someone can test these on other Slatwall.

Get 25% off CA Filament by using the following link:  http://referrals.californiafilament.com/v4Ge58zv?smile_ref=eyJzbWlsZV9zb3VyY2UiOiJzbWlsZV91aSIsInNtaWxlX21lZGl1bSI6IiIsInNtaWxlX2NhbXBhaWduIjoicmVmZXJyYWxfcHJvZ3JhbSIsInNtaWxlX2N1c3RvbWVyX2lkIjoxMjI4MjA3NDUwfQ%3D%3D