Fully 3d Printed Monitor Mount 100x100, 200x300, & 100x200

Everything is 3d printed aside from the screws used to attach it together. I have made most of it and do recommend using the slim model with petg or stronger filament. 

Print Settings: 
Filament: rapid petg by elegoo
speed: preset balanced speed
Printer: Centauri Carbon
Enclosed: Yes
Supports: Yes, tree organic
layer height: both .12mm and variable
Infill: Gyroid 25 percent or higher
walls: 2 or higher
 

Hope this helps in not spending an arm and a leg on a monitor mount. I have not tested the strength but it is holding up a 42 inch tv which I will post the photos of when I can. Everything was created in the free version of onshape. 

Any questions or requests would be greatly appreciated!!!

EDIT:
For use with the large 300x200 tv adapter you need to insert the slide in connector to the adapter instead of using the original 200x100 adapter.