IKEA Skadis compatible ESE pad dispenser

ESE coffee pad dispenser for the IKEA Skadis pegboard. I designed this simple yet effective dispenser box so that my ESE pads would be readily available at the coffee machine. Theinner size of 96x96mm will be able to adopt the majority of available ESE pads from various vendors and depending on the packaged thickness of the pads the height of 200mm should be able to adopt at least 15-18 pads. It is very easy to remove the pads, simply pull them out of the opening on the bottom of the box. It's that easy.

In order to increase the friction between the IKEA Skadis board and the holder I incorporated small shallow pockets on the rear side for small and thin (~1,5mm; I used this one) soft rubber pads so the dispenser cannot be pulled out of the slots unintended.

Printed it in PLA with 0,2mm layer height, 30% grid infill, 5mm brim and organic supports for the hooks on the back. 

Enjoy a good coffee and Happy Printing !