December 30, 2025
Description
This 3D-printable enclosure is designed for the ESP8266 D1 Mini LED candle controller project. It provides a compact and stable housing for the custom PCB, with dedicated openings for the Micro-USB connector and enamelled copper wire routing for the LEDs.
The enclosure is compatible with both configurations: with or without the BME280 sensor. The project details, assembly instructions, and electronics setup can be found here: https://www.filipnet.de/esphome-smart-led-candles/
Anycubic Kobra S1 Combo – Print Settings Overview
The following table summarizes the print settings and material usage for both parts printed on the Anycubic Kobra S1 Combo. These values are provided as a reference and can be adjusted depending on filament brand and printer calibration.
Feature | Body | Top |
|---|---|---|
Print Duration | 48 min | 29 min |
Model Size (mm) | 61.89 × 81.76 × 24.80 | 49.20 × 69.20 × 7.40 |
Layers | 124 | 37 |
Estimated Printing Time | 36 min 12 s | 15 min 6 s |
Material | PLA, 18 g | PLA, 7 g |
Layer Height (mm) | 0.20 | 0.20 |
Hot Bed Temp (°C) | 55 | 55 |
Nozzle Temp (°C) | 215 | 215 |
Infill (%) | 15 | 15 |
Supports | On | Off |
Brim | On | On |
Filament Retract Length (mm) | 0 | 0 |
Perimeters | 2 (Width: 0.42 mm, Speed: 200 mm/s) | 2 (Width: 0.42 mm, Speed: 200 mm/s) |
Travel Speed (mm/s) | 300 | 300 |
License:
Creative Commons — Attribution — Noncommercial — Share Alike
6
Filipnet
