JARB - Just another router base. With dust extraction.

I was searching for a router base that has a dust connector while allowing me to see the router bit in action. This part is heavily inspired by this work:

https://www.printables.com/model/1086661-router-base-woodworking

It has a 84mm x 84mm square baseplate,with 3 mounting options: 

1. Makita 62 x 70mm - M4 nut inlay to be mounted from below

2. Makita 56/54 x 45mm - M4 nut inlay to be mounted from below

3. 62 x 62mm symmetric counterbores to be mounted from above, for example with wood screws.

The dust connector is for 35mm vacuums. In fact it's a cone going from 36mm to 34mm, so you can just plug the vacuum in.

For securing the router, please see my clamping lever:

https://www.printables.com/model/1534339-clamping-lever-m4-m3

Or use any other wing nut or the like.

Print this model with at least 3-4 walls and 20% infill.

Happy woodworking! Please consider leaving me a message if you have questions. In the next days, I will also relase a router table based on this model.