F16 TWP

I use a Neptune4 0.4 nozzle

Pla or Petg filament is the same

6pz Microbutton 6x6x10

24 2.8 or 3mm led , every light is made by 2 Leds in series and one 120 Hom resistor to +5v

print 24 TWP_ledsupport, and use it to install the Led inside the buttons over the vetronite Pcb.

There also TWP2_Vetronite, it's a Mask to Cut the multi holes 2.54 , and look the rights position of the Buttons 6x6x10 ( it's important to center the holes of every buttons)

I use PLA white to print the label , have a best light diffusion then clear type, use a drop ov glue to install over buttons