Protective plugs with magnet holder for Gweike M-Series CO2 lasers

Protective plugs with magnet holder for Gweike M-Series CO2 lasers

• Protect your CO2 laser mirrors from dust and debris

• Soft compliant TPU material

• Magnetic holder base for easy placement

• 4x 12x5mm neodymium magnets

Printing notes:

• Plugs and caps:

  • TPU is recommended for good fitment. 

  • PETG/PLA also works but not as well and might need to play with scaling.

• Holder:

  • Magnet pockets are sized at 13mm x 5.3mm

  • Suitable for 12x5mm or 1/2"x3/16" disc magnets

  • When slicing, insert a pause at 6mm (layer 30 for 0.2mm layer height).

  • If you do not want to pause during printing, you can chop off the bottom 0.4mm when slicing and glue the magnets.

Magnets:

• N52 1/2"d x 3/16"h  https://amzn.to/4q6ZwrK

• N35 12mm x 5mm https://amzn.to/4pifEoW