Hyper Tough NG Organizer Inserts

These new Next Gen (NG) Organizers are Hyper Tough branded ones from Walmart and recently sell for  $10.44 (2-Pack).  Here is the link Hyper Tough Organizer

The bins are numbers starting in the back left and working right & forward.

Part 1 of the files has:
Bin 1 & Bin 5 (mirrored)
Bin 2, 3, 4, 17, 18, 19 (6 instances all identical)
Bin 16 & Bin 20 (mirrored)

Part 2 of the files has:
Bin 6, 7, 8, 9, 10 & 11, 12, 13, 14, 15 (10 instances all identical)
Bin 21 & Bin 22 (mirrored)

These inserts have a 45 degree front on them which is handy to add labels or to simply write on it with a sharpie.  I've found printing these in white really brightens up the bin so you can see whats inside through the closed organizer lid.

These inserts were designed to be printed with just one perimeter (much like vase mode) with only the bottom layers and walls.  By printing the Part 1 & 2 sliced versions of the files you will have all the bins for one complete organizer.

Print Settings:

Layer Height:  0.2mm, Speed Profile

Filament:  PLA PRO (PLA+), Inland brand from Micro Center (White), SKU: 989426

Printer:  Prusa Core One / + HF .4mm nozzle

Perimeters:  1

Layers:  Top 0, Bottom 5

Infill:  0%

Seam position:  Nearest

Supports:  None

Brim:  None

Advanced→Extrusion width→External perimeters:  1mm (using a .4 nozzle)  Note:  This allows the single perimeter to be roughly 1mm wide.