January 1, 2026
Description
This is a DIY lens hood and cap for the very capable TTArtisan 27mm F2.8 lens. This has been tested on my Fuji X-T5, no vignetting has been detected.
It is friction mount, grabs onto the periphery of the little lens hood that comes with the lens. By design it goes on pretty stiffly, which is necessary since there's no actual bayonet for it to grab. Friction only.
The hood is best printed in either fiber filled PET-G or Polycarbonate, this will help resist "creep" and loosening over time.
After printing slide the "latch" part through the slot in the cap, then affix in place using the "pin".
Please check the photos for the best orientation on your printer bed.
Comments are welcomed.
License:
Creative Commons — Attribution — Noncommercial
NeilR
