JeNo 3.5" (DKZ Version)

INTRODUCTION:

Huge thanks to :

• nochamo - Youtube

• Jerome/Jéjé FPV - Youtube
  

This is a remix of JeNo 3.5 Official & JeNo 3.5" Custom in multi plate version. My main goal is to create Traditional 3.5" FPV Drone that can do Cinematic (no props in view) but also easily do Freestyle tricks while still maintaining the weight below 250gr because we want to fly everywhere, right?

Here's a few changes that I made to this frame:

• Lengthen the back bus by 2mm - following JeNo 3.5" from HallOfFrames to accommodate soft mounted DJI O4 Pro.

• There's still M2 holes to mount any VTX on the back of the quad.

• Moved the back stand off by 2mm to give space for the middle plate, arms and soft mounted DJI O4 Pro.  - In the original version, they collided each other.

• Redesign all the TPU pack to fit this frame.

• The Arms is 3mm thick - So keep in mind if you want to use another arm guard from other JeNo Page since they use 4mm thickness for the Unibody version.

NOTES:

• It can only take AIO Flight Controller - There's only 15mm spacing between the middle plate and top plate.

• I recommended a vertical ND filter instead of horizontal. (Mine is Speedybee filter set)

• For machining - there's no different than any other version. Here's a quick look of the mapping.

You can see my video on building this quad from the ground for the complete specs, tips and how to: